JT JTA896 RaceLite Aluminium Rear Sprocket – Pitch 520

JT JTA896 RaceLite Aluminium Rear Sprocket – 520 Pitch

JT rear sprocket. The vehicle fitment list below has been taken from the official JT Sprockets Application Guide 2024.

Technical Data

• JT Part Number / Fitment: JTA896
• Fitting Position: Rear
• Chain Pitch: 520
• Teeth available in shop: 50, 52

Compatible with – official JT vehicle fitment

Important note on tooth selection: The JT fitment number describes the compatible mount. The Application Guide additionally specifies the number of teeth with which each vehicle is listed. Other offered tooth counts for the same fitment family will alter the gear ratio and may differ from the stock gearing.

45 teeth according to JT Application Guide

• KTM 600 LC4 Enduro – Year 88-89 – Chain 520, 114 links

48 teeth according to JT Application Guide

• KTM 125 Enduro – Year 89 – Chain 520, 110 links

50 teeth according to JT Application Guide

• KTM 125 Enduro – Year 88, 90 – Chain 520, 112 links
• KTM 125 MX – Year 88-89 – Chain 520, 112 links
• KTM 250 Enduro – Year 88 – Chain 520, 114 links
• KTM 250 MX – Year 88 – Chain 520, 114 links
• KTM 350 Enduro – Year 88-89 – Chain 520
• KTM 350 MX – Year 89 – Chain 520, 116 links
• KTM 500 MX – Year 88-89, 91-93 – Chain 520, 116 links

52 teeth according to JT Application Guide

• KTM 125 Enduro – Year 86-87 – Chain 520, 114 links
• KTM 125 MX – Year 90 – Chain 520, 114 links
• KTM 250 Enduro – Year 81-87 – Chain 520, 114 links
• KTM 250 Enduro – Year 89 – Chain 520, 116 links
• KTM 250 MX – Year 83-87 – Chain 520, 114 links
• KTM 250 MX – Year 89 – Chain 520, 116 links
• KTM 350 Enduro – Year 84-87 – Chain 520
• KTM 420 Enduro – Year 81-83 – Chain 520, 116 links
• KTM 420 MX – Year 81-83 – Chain 520, 116 links
• KTM 495 MX – Year 81-84 – Chain 520, 116 links
• KTM 500 MX – Year 85-87, 90 – Chain 520, 116 links
• KTM 600 LC4 MX – Year 89 – Chain 520, 114 links

Installation and Gearing Note

• Check model, year, chain pitch, and desired number of teeth before ordering.
• A different number of teeth changes the gear ratio and may require a different chain length or an adjustment of the chain tension.
• Perform installation and tighten to the torque specifications provided by the vehicle manufacturer.