Moto-Master Halo brake disc front fixed with ABE Ø 320 mm | PCD 230 mm | 6-hole | 5.0 mm thick
Moto-Master Halo brake disc front fixed with ABE Ø 320 mm | PCD 230 mm | 6-hole | 5.0 mm thick
Couldn't load pickup availability
Moto-Master Brake Disc Halo front rigid with ABE Ø 320 mm | PCD 230 mm | 6-hole | 5.0 mm thick
Moto-Master Halo Discs
The Moto-Master HALO series sets new standards in the aftermarket. Its high-quality
steel rotor enables high braking performance while being extremely
durable at the same time. The precise size and positioning of the ventilation holes ensure
even heat distribution under high thermal stress, while the brake pad contact surface is cleaned evenly. For optimal performance, we recommend using Moto-Master brake pads.
- high-performance
- extremely resistant steel
- low wear
- can be used with all pad compounds
- TÜV-tested
- with ABE (General Operating Permit)
All Moto-Master discs are TÜV-tested. Moto-Master is a manufacturer of high-quality braking systems from Duizel in the Netherlands.
The Moto-Master product range extends from brake discs to brake calipers and brake master cylinders, as well as brake pads for motorcycles, scooters, and ATVs/quads.
Moto-Master brake discs are made of stainless steel and are available in flame or round (Halo) design.
The construction and design allow for even heat dissipation and thus protection against excessive wear, resulting in increased safety.
In some cases, a distinction can also be made between fixed, semi-floating, or full-floating brake discs. For sporty, ambitious, safety-conscious, and design-oriented bikers alike, Moto-Master brake discs are much more than just a good replacement for the original manufacturer's part. These brake discs are proven in international racing.
The vast majority of discs and pads are ABE certified.
We are happy to provide the ABE for this Moto-Master brake disc via email upon request. TÜV registration is not necessary if an ABE is present!
Unless otherwise stated: The offered product is an accessory/spare part from a third-party manufacturer, which was not manufactured on behalf of or with the approval of the motorcycle manufacturer. The mention of the brand name serves exclusively to determine compatibility.
Manufacturer: Moto-Master Brake Systems, Smaragdweg 12 , 5527 LB Hapert NL, info@moto-master.com
Technical data
| Model | round |
| Application | Scope of delivery: 1 brake disc |
| Diameter (mm) | 320 |
| Inner diameter (mm) | 210 |
| Thickness (mm) | 5.0 |
| Bolt circle (mm) | 230 |
| Number of mounting holes | 6 |
| Hole diameter (mm) | 10.5 |
| Material | Stainless steel |
| Color | Stainless steel |
| Homologation | According to certificate |
| Country of origin | Netherlands |
| Brand | Moto-Master |
| Item number | m110582 |
Fits the following vehicles
Please check the installation position and year of manufacture before purchasing.
| Brand | Model | Displacement | Type | Year of manufacture | Position |
|---|---|---|---|---|---|
| Honda | CBR 500 R ABS | 500 cc | PC44 | 2013 - 2016 | front |
| Honda | CB 500 X ABS | 500 cc | PC46 | 2013 - 2016 | front |
| Honda | CBR 500 R ABS | 500 cc | PC57 | 2017 - 2018 | front |
| Honda | CB 500 X ABS | 500 cc | PC59 | 2017 - 2018 | front |
| Honda | CBR 500 R ABS | 500 cc | PC62 | 2019 - 2021 | front |
| Honda | CBR 650 F ABS | 650 cc | RC74 | 2014 - 2016 | rear |
| Honda | CBR 650 F ABS | 650 cc | RC74 | 2014 - 2016 | front |
| Honda | CBR 650 F ABS | 650 cc | RC96 | 2017 - 2018 | rear |
| Honda | CBR 650 F ABS | 650 cc | RC96 | 2017 - 2018 | front |
